Sharp Car Video System N 80TC3 User Manual

LCD MONITOR  
Version 2.0  
TOUCH PEN UTILITY  
OPERATION MANUAL  
Applicable models (as of June 2015)  
PN-L803C/PN-80TC3/PN-ZL03  
(Available models differ according to region.)  
 
Introduction  
This software enables a touch pen of an applicable model to be used.  
To use a touch pen with a computer, this software must be installed on the computer.  
The touch pen (3 button pen) that is included with an applicable model is referred to as “active pen” in this manual.  
System Requirements  
Windows 7 (32-bit or 64-bit version),  
Windows 8 (32-bit or 64-bit version), Windows 8.1 (32-bit or 64-bit version)  
OS  
Intel Celeron or AMD Sempron 1.6 GHz or faster  
CPU  
Intel Core 2 Duo or AMD Athlon II X2 2.8 GHz or faster recommended  
Memory  
At least 2 GB  
Free space on hard drive At least 100 MB  
USB port  
USB (2.0 compliant)  
TIPS  
• Depending on the application software, active pen operation may not be possible (for example, if the application processes  
mouse and other operations independently).  
E
3
 
Setting up the PC  
Install  
Caution  
• Connect the touch panel, and then install the Touch Panel Settings Tool.  
• Insert the touch pen adapter into the LCD monitor before installing the Touch Pen Utility.  
• If an older version of the Touch Pen Utility is installed, remove (uninstall) the old version before installing the Touch Pen Utility.  
(See page 10.)  
• This can only be done by a user with administrator authority.  
1. Start your PC.  
2. Exit all applications that are running.  
3. Insert the supplied CD-ROM into the CD-ROM drive of your PC.  
4. Open the CD-ROM drive in “Computer”.  
5. Double-click the “TouchPen” folder, and then double-click the “Windows” folder.  
6. Double-click “Setup.exe”.  
When the “User Account Control” screen appears, click “Yes” (or “Allow”).  
7. Select the language for installation, and click “Yes”.  
For the remainder of the procedure, follow the instructions shown on the screen.  
• If the “Windows Security” screen appears, click “Install” (or “Install this driver software anyway”).  
• If the “Software Installation” screen appears, click “Continue Anyway”.  
• If the “SHARP Touch Pen Utility Files in Use” screen appears, click “Continue”.  
8. When the installation finished screen appears, click “Close”.  
9. If a screen appears prompting you to restart your PC, click “Yes”.  
This completes the installation of the Touch Pen Utility.  
Each time the computer is started, the Touch Pen Utility starts automatically to enable the active pen to be used.  
E
4
 
Showing active pen information  
The Touch Pen Utility starts automatically.  
You can view information on the active pen that is being used.  
1. Click the Touch Pen Utility icon ( ) on the taskbar.  
Touch pen information : Shows the registration number, the battery level and the signal strength of the active pen being  
used.  
Touch pen settings  
• Operation settings  
• Version Information  
• Exit  
: See page 6.  
: See page 9.  
: Shows the version of this software.  
: Exit this software.  
TIPS  
• If an active pen is not used for 1 minute, it will enter sleep mode.  
When the active pen is used, it will automatically wake.  
• When an active pen is in sleep mode, the battery level and signal strength will not be shown correctly.  
After the pen wakes, it will take time for the battery level and signal strength to be shown correctly.  
• When an active pen is in sleep mode, the active pen settings cannot be configured.  
• Do not continuously press the tip or function button of an active pen. It may not be possible to configure the touch pen  
settings.  
E
5
 
Active pen settings  
How to configure settings  
Settings that can be changed are as follows.  
• Registering/canceling an active pen: See page 7.  
• Advanced: See page 7.  
- Touch pen setting: See page 7.  
- Function buttons: See page 8.  
-
Test Information: Shows the active pen function buttons, pen pressure levels, and other information. (For service technicians.)  
1. Click the Touch Pen Utility icon ( ) on the taskbar.  
2. Click [Touch pen settings].  
3. Change the settings. (See page 7.)  
E
6
 
Active pen settings  
Registering/canceling an active pen  
To use the optional active pen, you must register the active pen (pairing).  
You can also cancel the registration of an active pen.  
Registering an active pen  
n
See the operation manual for the LCD monitor.  
Canceling the registration of an active pen  
n
1. Click the active pen you want to cancel in the touch pen settings screen.  
2. Click [Release].  
Advanced  
1. Click the active pen whose settings you want to change in the touch pen settings screen.  
2. Click [Advanced].  
Touch pen setting  
n
Touch pen pressure  
Set whether touch pen pressure mode is used for the active pen.  
Pen tip  
You can set the touch pen pressure at which the touch panel recognizes the pen.  
When the input mode is “Pen Digitizer”, set the pressure to the lightest setting (to the leftmost position).  
level  
Shows the strength of the touch pen pressure.  
E
7
 
Active pen settings  
Customize touch pen pressure  
n
You can adjust the pen pressure in the Pen Software.  
Touch pen pressure table setting  
You can manually adjust the touch pen pressure and stroke thickness.  
Preset  
The touch pen pressure table can be selected and set from the presets.  
Preset settings  
The set touch pen pressure table can be assigned a name and saved. (Up to 10.)  
In addition, saved presets can be deleted.  
Function buttons  
n
Functions can be assigned to the function buttons of an active pen.  
The factory preset values are as follows.  
B1 (Function button 1) : Pen Software Link  
B2 (Function button 2) : PageDown  
B3 (Function button 3) : PageUP  
Functions that can be set are as follows.  
Function type  
Function  
OS  
Invalid, Right mouse click, Undo, Redo, PageUP, PageDown, ↑ (cursor up), ↓ (cursor down), Eraser*1  
Pen Software  
Pen Software Link*2  
*1  
Can be used when the input mode is “Pen Digitizer”. (See page 9.)  
Can be used as the eraser for the digitizer pen in Windows.  
Cannot be used when the input mode is “Pen Digitizer”.  
*2  
E
8
 
Operation settings  
Input mode  
Set the action for touch by finger or active pen.  
It is normally recommended that you use “Standard”.  
• Standard  
• Pen  
: The touch action takes place when the screen is touched by active pen or finger.  
: The touch action takes place only when the screen is touched by active pen. The touch action does not takes  
place when the screen is touched by finger.  
• Pen Digitizer : You can use an active pen as a digitizer pen in Windows.  
TIPS  
• Set to “Standard” to use Simultaneous Drawing or Eraser in the Pen Software.  
E
9
 
Uninstall  
Caution  
• This can only be done by a user with administrator authority.  
1. Click the Touch Pen Utility icon ( ) on the taskbar and click “Exit”.  
• If a confirmation window appears, click “Yes”.  
2. Remove the touch pen adapter.  
3. Select “Control Panel” from the “Start” menu.  
4. Click “Uninstall a program”.  
• If you are using icon view, click “Programs and Features”.  
5. Select “SHARP Touch Pen” and click “Uninstall”.  
• Follow the on-screen instructions.  
• When the “User Account Control” screen appears, click “Yes” (or “Allow”).  
• When the “The following applications should be closed before continuing the install” message appears, click “OK”.  
6. If a screen appears prompting you to restart your PC, restart your PC.  
This completes the uninstallation.  
E
10  
 
PU V2.0 EN15E(1)  
 

Sharp CRT Television XG NV7XU User Manual
Sharp PDAs Smartphones YO 270 User Manual
Soleus Air Air Conditioner PE7 10R 03 User Manual
Sony Blu ray Player BDP S390 User Manual
Sony Camcorder CCD TR555 User Manual
Sony Digital Photo Frame DPF D75 User Manual
Sony Laptop PCG F690 User Manual
Sony MiniDisc Player MZ E610 User Manual
Sylvania TV VCR Combo 6727FDE User Manual
Tanita Scale BC 540 User Manual