Stanton Mixer M212 User Manual

M.212  
USER’S MANUAL  
 
INTRODUCTION  
Thank you for purchasing Stanton’s newest innovation in professional tabletop mixer. The M.212 mixer was designed to bring style and reliability to the  
mobile or club DJ at an affordable cost.  
MAIN FEATURES  
2 bend EQ w/ input GAIN control per channel.  
Fader Start  
Power on/off muting  
Long Life crossfader  
Crossfader curve control  
ACCESSORIES  
Checking Package Contents  
Check that the carton contains the following items:  
(1) M.212 Mixer  
(2) AC adaptor  
(3) User's Manual  
1
 
CONTROL OVERVIEW  
TOP PANEL  
9. Headphone Input - Insert your ¼” headphone plugs here.  
1. Channel Gain - Adjusts the pre-fader volume for cleaner  
sound.Reduce the channel gain if you notice the level  
indicators flashing red.  
10. Fader Start On/Off Switch - When the unit has been  
connected to a CD player using a control cable, this  
becomes the On/Off switch to automatically start and stop  
the CD player while using the crossfader.  
2. Mic Input Gain - Adjusts microphone input level.  
3. Mic EQ - The mic channel includes a two-band EQ with a  
11. Level Indicators - The dual LED indicators are used to  
indicate the master output level of the Right and Left  
channels.  
range of +10 dB to -10 dB.  
4. Channel EQ - Adjusts the high, mid and low frequency  
levels of the input channels for either making the treble or  
bass louder or to be used as an effect.  
12. Channel Cue / Cue Pan - Used to preview channel audio  
to your headphones. Listen here before bringing up  
channel faders or moving the crossfader.  
5. Input Fader - Controls individual source levels (channels) in  
the mix.  
13. Headphone Level - Adjusts cue volume.  
6. Crossfader Curve - The CUTsetting allows the use of the  
crossfader for quick cut in and out when scratching and  
mixing. The FADE setting is used for longer segues,  
typically when mixing between two beat-matched sources.  
14. Master Level - Controls the overall output level.  
15. Input Toggle Switch - Selects which source will be active  
based on what you have connected to the rear panel input  
section (phono/line).  
7. Crossfader - Used to mixthe sound from both channels.  
8. Mic Input - Insert your ¼” microphone plug here.  
2
 
CONTROL OVERVIEW  
REAR PANEL  
DC 6V  
16. Power Switch - Turns unit off and on.  
17. Power Connector - Plug in the included power supply here.  
18. Fader Start Control Jacks - Connect these jacks to the Fader input jacks of the CD player using the 3.5mm stereo mini cord.  
19. Master Output - Unbalanced RCA connectors controlled by the Master level.  
20. Line Inputs - Unbalanced RCA jacks for connecting stereo audio from line level sources such as CD players, HiFi VCRs,  
cassette decks, DAT machines, laser discs, tuners, even synthesizers or other mixing consoles.  
Note: Plug mono audio sources into both Left and Right inputs using a "Y" cable connector.  
21. Phono Inputs - Plug your turntables in here. When these connectors are used, your signal is fed directly to the high-quality  
RIAA phono pre-amplifiers. Use this position only for turntables. Line level sources will overload the sensitive phono preamps  
and will cause distortion.  
22. GND - Connect each of your turntable ground leads to either of the two ground terminals.  
3
 
QUICK SETUP DIAGRAM  
Review this setup diagram. Make sure all faders are at "zero" and all devices are off. First, connect all input sources and processors. Next, connect your  
microphone and monitor headphones. Finally, connect the stereo outputs to the power amplifier(s) and/or audio receivers such as tape decks. Plug your  
mixer into AC power. Now you are ready to switch everything on.  
IMPORTANT: Always switch on your audio input sources, such as turntables or CD players first, then your mixer, and finally any amplifiers. When turning  
off, always reverse this operation by turning off amplifiers, then your mixer, and then input devices.  
Turntable  
Power  
Supply  
Turntable  
DC 6V  
CD Player Controller  
DAT, etc.  
Power Amp.  
4
 
SPECIFICATIONS  
Input / output impedance & sensitivity: (Master 0 dBV output, load= 100k ohm, Max, Gain, EQ flat)  
Line 10k ohm /-14 dBV (200 mV) +/-2 dB  
Phono 47k ohm /-50 dBV (3.16mV) +/-2 dB  
Mic 2.2k ohm /-60 dBV (1mV) +/-2 dB  
Master 1k ohm  
Phones 33 ohm / 0 dBV (1V) ±2 dB  
Max. output (THD= 1%, Maximum gain, EQ flat)  
Master  
Phones  
More than +18 dBV (8.0V) at load= 100k ohm  
More than +4 dBV (1.6V) at load= 32 ohm  
Channel balance: Within 3 dB  
Frequency response: (Master output, EQ flat)  
Line  
20-20 kHz +/- 2 dB  
Phono  
Mic  
20-20 kHz +2, -3 dB (RIAA)  
20-20 kHz +2/-3 dB  
S/N ratio: (Maximum gain, master 0 dBV output, EQ flat, w/20 kHz LPF, A-weighted)  
Line  
Phono  
Mic  
Less than -80 dBV  
Less than -70 dBV  
Less than -60 dBV  
THD + N: (Master 0 dBV output, maximum gain, w/ 20 kHz LPF)  
Line  
Less than 0.05% 20 - 20 kHz  
Phono  
Mic  
Phones  
Less than 0.1% 20 - 20 kHz (IEC-A WTD)  
Less than 0.2% 20 - 20 kHz (IEC-A WTD)  
Less than 0.1% 20 - 20 kHz (From line input)  
Crosstalk: (From master output, A-weighted)  
Line/Phono  
More than 70 dB at 1 kHz between L and R  
More than 70 dB at 1 kHz between channels  
MIC EQ:  
Hi  
10 +/- 2 dB at 10 kHz  
-10 +/- 2 dB at 10 kHz  
10 +/- 2 dB at 100 Hz  
-10 +/- 2 dB at 100 Hz  
Low  
Channel EQ:  
Hi  
9 +/- 2 dB at 13 kHz  
-15 +/- 3 dB at 13 kHz  
9 +/- 2 dB at 1 kHz  
Less than -23 dB at 1 kHz  
9 +/- 2 dB at 70 Hz  
Mid  
Low  
-26 +/- 3 dB at 70 Hz  
Power Source:  
Dimensions:  
Weight:  
DC 6V  
230 (W) X 267 (D) X 111 (H) mm  
1.65 kg  
5
 
WARRANTY & RETURN POLICY  
Warranty  
Through Stanton’s authorized dealers around the World, Stanton, or one of Stanton’s authorized distributors outside the U.S., will, without charge,  
repair or replace, at the sole discretion of the entity responsible for making the repair or providing the replacement, any Stanton merchandise proved  
defective in material or workmanship for a period of one year following the date of original purchase. Exceptions to this warranty are as noted below:  
The warranty for mechanical parts which are subject to wear and tear are limited to the earlier of either thirty (30) days following the date of original  
purchase or the following number of cycles: Faders - 15,000; Rotary potentiometers - 10,000; and Switches - 10,000.  
Stanton will warrant all replacement parts and repairs for ninety (90) days from the date of original shipment. Repairs made necessary by reason of  
misuse, alteration, normal wear, or accident are not covered under this warranty.  
Returns  
Authorized Stanton dealers are only authorized to sell and distribute merchandise within a specific country. All goods requiring warranty repair or  
replacement must be returned (freight prepaid if not hand-delivered) to the authorized Stanton dealer from whom the merchandise was purchased  
and in the same country where the merchandise was purchased. For purposes of purchases made via the Internet, the merchandise must be  
returned to the authorized Stanton dealer in the country where the authorized Stanton dealer which sold the merchandise to purchaser is located and  
not the authorized Stanton dealer in the country where the purchaser is located or the country in which the merchandise was received. Any returns  
to a non-authorized dealer or to an authorized Stanton dealer not in the same country as the merchandise was intended to be sold or as set forth  
above will void this warranty.  
To initiate a warranty repair, you must contact the authorized Stanton dealer from whom you purchased the merchandise, and follow such authorized  
Stanton dealer’s return policy.  
Stanton assumes no risk and shall be subject to no liability for damages or loss resulting from the specific use or application made of the  
merchandise. Stanton’s liability for any claim, whether based on breach of contract, negligence, infringement of any rights of any party, or product  
liability, and relating to the merchandise shall not exceed the price received by Stanton from your purchase of such merchandise. In no event will  
Stanton be liable for any special, incidental or consequential damages (including loss of use, loss of profit and claims of third parties) however  
caused, whether by the negligence of Stanton or otherwise. To the extent permitted by law and except as otherwise provided above, Stanton  
disclaims any express or implied warranties of merchantability or fitness for a particular purpose.  
The above warranty provides you with specific legal rights. You may also have additional rights, which are subject to variation from state to state and  
country to country.  
If there is a dispute regarding the warranty of merchandise that does not fall under the warranty conditions stated above, please include a written  
explanation with the merchandise when returned pursuant to the terms and conditions set forth herein.  
Stanton Magnetics  
772 S. Military Trail  
Deerfield Beach, FL 33442  
Phone: +1 (954) 949-9600  
Technical Support: [email protected]  
LITS00055 11/12/09  
 

Shark Iron GI490 11 User Manual
SMSC Network Card USB3290 User Manual
Sony Digital Camera SNC RZ50P User Manual
Sony Flat Panel Television 4 187 903 111 User Manual
Sony Headphones MDR AS100W User Manual
Sony Speaker SUBWOOFER User Manual
Sony Speaker System SS XG500 User Manual
Speco Technologies Security Camera IP WDRB1 User Manual
Subaru Robin Power Products Welder EX 21D User Manual
Sunbeam Juicer JE9000 User Manual